LG LNU5110R Manuel d'utilisateur télécharger pdf

MODEL

LNU5110R series

Please read this manual carefully before operating

your set and retain it for future reference.

High

Denition

Network

Camera

OWNER’S MANUAL

Specication

Item LNU5110R series

Camera

Image Device 6.28 mm (1/3 Type) CMOS

Lens Type 3 mm to 9 mm F1.2

Day / Night ICR (Auto / Day / Night / External / Schedule)

Minimum Illumination

Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE)

B/W: 0 lx @ IR LED on

WDR Support

IR Distance 40 m

Image Enhancement

Backlight Compensation, 2D+3D-DNR, De-fog,

Exposure Control, AGC, White Balance, Privacy Masking,

Sharpness, EIS, Pivot, Smart IR

Video /

Audio

Compression H.264, H.264_High, MJPEG

Resolution

1280 x 1024 / 1280 x 720 / D1 (704 x 576) / CIF (352 x

240)

Maximum Frame Rate 60 fps @ 1280 x 1024

Multi-Streaming Up to 4

ROI (Region of Interest) Smart codec (Up to 8)

Video Analytics

Motion detection, Tampering alarm, Face detection,

Intrusion detection, Crossing line, Object counting,

Object removal, Object desertion

Text Overlay Support

Audio Compression G.711, G.726

2-way Audio Support

Audio Detection Support

Event

Event Trigger Video analytics, Audio detection, Alarm input

Event Notication Relay Out, Email, FTP

Pre Event Buering Support

Interface

Analog Out BNC out

Audio In / Out 1 In / 1 Out

Alarm In / Out 1 In / 1 Out

SD Slot micro SD (Up to 32 GB)

Network

Ethernet RJ-45 10 / 100 BASE-T

Security

Password protection, HTTPS (SSL, TLS), IP ltering,

IEEE 802.1X

Open Protocol ONVIF 2.2 Prole S, PSIA 1.1

Protocol

IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP,

DHCP, ICMP, QoS, UPnP

IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)

Integrated Software

LG Ipsolute VMS Suite / Mobile application (iPhone,

iPad, Android)

Connections Up to 20

General

Power Source AC 24 V, DC 12 V, PoE

Maximum Power

Consumption

10.6 W

Maximum Input Current 670 mA (AC 24 V), 750 mA (DC 12 V), 200 mA (PoE)

Operation Temperature /

Humidity

-10 ºC to 55 ºC / 0 % RH to 80 % RH

Protection IK10, IP66

Dimension (W x H x D) 92 mm x 90 mm x 339 mm

Weight 1.54 kg (with Sunshield 1.7 kg)

Note that design and specication of this unit may change from the manual as quality and

improvement without prior notice.

Components

Camera, CD (Software and Owner’s Manual), Installation Manual, Test monitor cable, Anchor (3 EA),

Wrench (1 EA), Tapping Screw (3 EA), Installation sticker, Sunshield and Fixing screw

Warning: Install the camera on a ceiling or wall

where can withstand the weight of 5 times of

the camera including mounting bracket.

Caution: This installation shall be made by a

qualified service person and shall conform to

all local codes.

Caution: To avoid electrical shock, do not

open the cabinet. Refer servicing to qualified

personnel only.

Caution: The apparatus shall not be exposed

to water (dripping or splashing) and no objects

filled with liquids, such as vases, shall be placed

on the apparatus.

Caution: Make sure the power supply voltage

is correct before using the camera.

Caution: Do not drop the camera or subject it

to physical shock.

Caution: The sensor may be burned out by

a laser beam, so when any laser equipment is

being used, make sure that the surface of the

sensor not be exposed to the laser beam.

Caution: While shipping, the camera should be

packed in its original packing.

Caution: It is permitted to use ancillary

equipment (e.g. A UPS) to prevent the damage

from mains supply voltage reductions.

Note:

Please make sure the product is installed

appropriate places where secured from flood,

such as under the eaves, to operate properly.

This product is certified as IP66 standard.

However, if there is any flood concerns, it

is highly recommended to use an outdoor

Housing. When you install the camera inside

an outdoor Housing, please use one of the

following methods:

1. Remove the front glass of Housing before

installing the camera.

2. To keep the front glass of Housing, remove

the front cover, and then put the camera

close to the front glass.

Disposal of your old appliance

1. This crossed-out wheeled

bin symbol indicates

that waste electrical

and electronic products

(WEEE) should be disposed

of separately from the

municipal waste stream.

2. Old electrical products can contain

hazardous substances so correct disposal

of your old appliance will help prevent

potential negative consequences for the

environment and human health. Your old

appliance may contain reusable parts that

could be used to repair other products,

and other valuable materials that can be

recycled to conserve limited resources.

3. You can take your appliance either to the

shop where you purchased the product,

or contact your local government waste

office for details of your nearest authorised

WEEE collection point. For the most up to

date information for your country please

see www.lg.com/global/recycling

EuSP Ltd.

Herald Way Pegasus Business Park

Castle Donington, DE74 2TZ United Kingdom

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated dangerous voltage

within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or

modifications to this equipment may cause harmful interference unless the modifications are

expressly approved in the instruction manual. The user could lose the authority to operate this

equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

• A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this

product in the end user.

• Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces

or shall be provided with brushings.

Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.

Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.

Warning: This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.

Warning: Please adopt the power adapter which can meet the safety extra low voltage (SELV)

standard. And source with DC 12 V or

AC 24 V (depending on models) according to the IEC60950-1 and Limited Power Source standard.

Important Safety

Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that

produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A

polarized plug has two blades with one

wider than the other. A grounding type

plug has two blades and a third grounding

prong. The wide blade or the third

prong are provided for your safety. If the

provided plug does not fit into your outlet,

consult an electrician for replacement of

the obsolete outlet.

10. Protect the power cord from being

walked on or pinched particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories

specified by the manufacturer.

12. Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

Handling of the unit

Be careful not to spill water or other liquids on

the unit. Be cautious not to get combustible or

metallic material inside the body. If used with

foreign matter inside, the camera is liable to fail

or to get cause of fire or electric shock.

• Remove dust or dirt on the surface of the

lens with a blower.

• Use a soft and lint-free, dry cloth(such as

glass cleaner) to clean the body. If it is

very dirty, use a cloth dampened with a

small quantity of neutral detergent then

wipe dry.

• Avoid the use of volatile solvents such

as thinners, alcohol, benzene and

insecticides.

They may damage the surface finish and/

or impair the operation of the camera.

• This camera is designed for mounting on

the ceiling or wall. If you install this camera

upside down, it may cause malfunction.

Operating and storage

location

Avoid viewing a very bright object (such as

light fittings) during an extended period. Avoid

operating or storing the unit in the following

locations.

• Extremely hot or cold places (operating

temperature -10 °C to 55 °C, however, we

recommend that the unit be used within a

temperature range of 0 °C to 45 °C)

• Damp or dust place

• Places exposed to rain

• Places subject to strong vibration

• Close to generators of powerful

electromagnetic radiation such as radio or

TV transmitters.

• Do not use the camera in such place

where rapid temperature fluctuation by

switching an air conditioner on and off.

Символ «не для пищевой продукции»

применяется в соответствие с техническим

регламентом Таможенного союза «О

безопасности упаковки» 005/2011 и указывает

на то, что упаковка данного продукта не

предназначена для повторного использования

и подлежит утилизации. Упаковку данного

продукта запрещается использовать для

хранения пищевой продукции.

Символ Кедендік одақтың 005/2011

техникалық регламентіне сәйкес

қолданылады және осы өнімнің қаптамасын

екінші рет пайдалануға арналмағанын және

жоюға жататынын көрсетеді. Осы өнімнің

қаптамасын азық-түлік өнімдерін сақтау үшін

пайдалануға тыйым салынады.

Символ «петля Мебиуса» указывает на

возможность утилизации упаковки. Символ

может быть дополнен обозначением материала

упаковки в виде цифрового и/или буквенного

обозначения.

Символ қаптаманы жою мүмкіндігін көрсетеді.

Символ сандық код және/немесе әріп

белгілері түріндегі қаптама материалының

белгісімен толықтырылуы мүмкін.

Импортер ООО “ЛГ Электроникс Рус”

Адрес импортера: 143160 Российская Федерация, Московская область, Рузский район, сельское поселение Дороховское,

86 км. Минского шоссе, д.9

Адрес производителя: ЛГ ЭЛЕКТРОНИКС (ХУЖОУ) ИНК., ЗАВОД ХАТАИ

ЛГ Электроникс (Хужоу) Инк., завод Хатаи

516006, Китай, пров. ГуанДонг, г. Хужоу, Промышленная зона

Жонгкай, Индустриальный парк Хутаи, ХуФенг Донг Уи Роуд, 13.

Российская Федерация

Сделано в Китае

*MFL69458107*

1 2

Résumé du contenu

Page 1 - *MFL69458107*

MODELLNU5110R seriesPlease read this manual carefully before operating your set and retain it for future reference. High Denition Network CameraOWN

Page 2

Part Names and Functionsi j mk na b cd e f g hla Lens Coverb Angle adjusterAdjust the camera angle.c Tilt adjusterAdjust the tilt position.d Pan a

Plus de documents pour Équipement musical supplémentaire LG LNU5110R

Voir le document LG LNU5110R Manuel d'utilisateur

LG LNU5110R Manuel d'utilisateur (2 pages)

Commentaires sur ces manuels

Pas de commentaire

LG LNU5110R Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement musical supplémentaire LG LNU5110R. LG LNU5110R Owner's manual [tr] Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Équipement musical supplémentaire LG LNU5110R

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical supplémentaire LG LNU5110R