Connecting 11
Connecting
2
720x576i(480i), 720x576p(480p), 1280x720p,
1920x1080i or 1920x1080p video input.
-
The 1080p, 720p and 576p(480p) resolutions
are the progressive scan applied resolution.
y
Not all HDCP-compatible HDMI or DVI devices
will work with this unit.
-
The picture will not be displayed properly
with non-HDCP device.
-
This unit does not playback and TV screen is
changed to black screen.
Resolution Setting
y
Depending on your TV, some of the resolution
settings may result in the picture disappearing
or an abnormal picture appearing. In this case,
press RESOLUTION repeatedly until the picture
re-appears.
y
Changing the resolution when the unit is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn o the
unit and then turn it on again.
Connecting to an
Amplifier
Connecting Audio cable
Connect the AUDIO OUT on the unit to 2CH AUDIO
IN on amplier with Audio cable, such as AUDIO
Left/Right with white/red
·ͺ͵Ͷ
Audio Cable
Amplier/
Receiver
Rear of the Unit
Connecting COAXIAL or
OPTICAL (digital audio) cable
Connect the COAXIAL or OPTICAL (digital audio
out) on the unit to Digital Audio IN (COAXIAL or
OPTICAL) on amplier with COAXIAL or OPTICAL
cable.
·ͺ͵Ͷ
΅ͺʹͲͽ
Coaxial Cable
Optical Cable
Amplier/
Receiver
Rear of the Unit
y
If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 KHz] on the setup menu (See page
12).
y
If your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu
(See page 12).
Connecting HDMI cable
Connect the HDMI OUT on the unit to the HDMI IN
on amplier with HDMI cable.
Connect the HDMI OUT jack on amplier to HDMI
IN jack on TV with HDMI cable, if the amplier has
HDMI OUT jack.
·ͺ͵Ͷ
Rear of the Unit
TV
HDMI Cable
Amplier/
Receiver
HDMI Cable
Commentaires sur ces manuels