LG 43LK5260PTA Manuel d'utilisateur

www.lg.comLK51*LK52*(1804-REV02)AAAX 4(M4 X L14)1 2 3AB124 5 DC-IN(19 V )231 AAA: Depending on modelUnpackingCheck your product box for the f

ABCDEFF G(mm)(kg)43LK5100PTB43LK5100PVB43LK5100YVB976 628 217.9 583 81.5 8.1 7.8Power requirement 19 V 2.7 A 43LK5260PTA976 628 217.9 583 81.5

OWNER’S MANUALEXTERNAL CONTROLDEVICE SETUPPlease read this manual carefully before operating the set and retain it for future reference.www.lg.com

2ENGENGLISH2KEY CODESKEY CODES• This feature is not available for all models.Code (Hexa)Function NoteCode (Hexa)Function Note00 CH +, PR + R/C Button

3ENGENGLISH3EXTERNAL CONTROL DEVICE SETUPEXTERNAL CONTROL DEVICE SETUP• Image shown may differ from your TV.Connect the USB to Serial converter/RS-23

4ENGENGLISH4EXTERNAL CONTROL DEVICE SETUPPhone jack Type• You need to purchase the phone-jack to RS-232 cable required for the connection between the

5ENGENGLISH5EXTERNAL CONTROL DEVICE SETUPCommunication Parameters• Baud rate : 9600 bps (UART)• Data length : 8 bits• Parity : None• Stop bit : 1

6ENGENGLISH6EXTERNAL CONTROL DEVICE SETUPTransmission / Receiving ProtocolTransmission[Command1][Command2][ ][Set ID][ ][Data][Cr][Command 1] : Firs

7ENGENGLISH7EXTERNAL CONTROL DEVICE SETUP* Commands may work differently depending on model and signal.01. Power (Command: k a) ► To control Power *On

8ENGENGLISH8EXTERNAL CONTROL DEVICE SETUP08. Color/Colour (Command: k i) ► To adjust the screen Color(Colour). You can also adjust colour in the PICTU

9ENGENGLISH9EXTERNAL CONTROL DEVICE SETUP18. Equalizer (Command : j v) ► Adjust EQ of the set.Transmission [j][v][ ][Set ID][ ][Data][Cr]0 0 0 0 0 0 0

10ENGENGLISH10EXTERNAL CONTROL DEVICE SETUP* Analog Antenna/CableData 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cab

11ENGENGLISH11EXTERNAL CONTROL DEVICE SETUP2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 &

12ENGENGLISH12EXTERNAL CONTROL DEVICE SETUP* [Data 02], [Data 03] functions depend on model and signal. * If [Data 00] is 00 (3D On), [Data 03] has