LG VR66802VMWP Manuel d'utilisateur télécharger pdf (Page 17)

HOW TO INSTALL THE HOME STATION

1. Position the home station against a wall on hard level ﬂooring to

prevent sliding during docking.

Remove objects within 1.5 m to the right and left side and within

2 m to the front.

2. Plug the power cord into an outlet.

Wrap the remaining power cord around the ﬁxed hook on the

back side of the home station or along the wall surface so that

the travel path of the Robot Cleaner will not be obstructed.

3. Fix the home station against the wall so that it does not move.

Then turn on the power switch.

4. When the remote controller is not used, store it in the remote

controller holder on the home station.

1.5 

2 

Fixing hook of power cord



in, the Robot Cleaner will not return to the station to charge automatically.

How to Install the Home Station

< Warning > Do not operate the Robot Cleaner if the Home Station has a damaged cord

or plug, if it is not working properly, or if it has been damaged or dropped. To

avoid electrical hazards, the cord must be replaced by LG Electronics, Inc. or a

qualified service person.

Tip

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Pas de commentaire

LG VR66802VMWP Manuel d'utilisateur Page 17