LG LAS750M Manuel d'utilisateur télécharger pdf (Page 19)

Troubleshooting 19

Troubleshooting

Software Update

When the MUSICow product is connected to

your home network, rst of all, check whether the

rmware version is the latest on all speakers and

the Music Flow Player application.

MUSICow product might require recent rmware

to be installed for optimal operation.

[Settings

Version Info.]: you can check if your

speaker has the latest rmware.

How can I initialize speaker?

If you press down “ (Add)” button until Beep

sounds once, the network related settings are

initialized. (For sound bar, “DISABLED” is displayed in

the display window.)

If you press down “ (Add)” button until Beep

sounds twice, factory initialization is performed.

(For sound bar “RESET” is displayed in the display

window.)

Speaker is not connected.

1. For speaker that is already connected, check if

the phone is connected to the same router as

the speaker, then connect to the same router,

and check the followings.

1-1. Set Power off / on, and check the

connection.

1-2. If it is not solved by 1-1, close the

application and run again.

1-3. If it is not solved by 1-2, reset the Speaker

and reconnect.

1-4. If it is not solved by 1-3, delete the App,

reinstall, and try again. To reset, press and

hold the “ADD” button for 8 seconds until

you hear one beep.

2. If you change the location of the speaker that is

in use,

2-1. If the changed location is too far from the

home router, it may not be connected.

Place and use it at a location that is close

enough to router.

2-2. Connect the speaker with a LAN cable,

and for additionally installed speakers, if

they are not close enough to the speaker

connected with a LAN cable, additionally

install Bridge or another speaker in the

middle location between the speaker

connected with LAN cable and the

speaker with sound being disconnected.

There are times that speaker

disappears from the application

1. If the speaker blinking lamp is not blinking, and

stays as white: Even after the speaker power off

and on, if the problem continues, in this case

you have to reset the speaker (To reset, press

and hold the “ADD” button for 8 seconds until

you hear one beep. ) and need to register again.

Carry out speaker installation or additional

procedures.

2. If the speaker blinking lamp blinks white -

network signal is unstable. Wait for a while, or

move the speaker to another location closer to

other speaker or router.

3. Press menu key or menu at the top right side of

Home screen to end Music Flow Player app and

run again.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

LG LAS750M Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Non LG LAS750M