LG PRHR041.ENCXLRU Manuel d'utilisateur

ENGLISH ITALIANO ESPAÑOLFRANCAISDEUTSCHPORTUGUESEРУССКИЙ ЯЗЫКP/NO : MFL32987304INSTALLATION MANUALAIRCONDITIONERwww.lg.comTYPE : MODELS : PRHR Series(

10 HR UnitInstallationWARNING• If you want to use a PRHR031 for 2 branches HR unit after closing the 3rd pipes, set the dip switch for 2 branches HR u

Installation Manual 11ENGLISHInstallation3. SW01M/SW03M/SW04M (Dip S/W and tact S/W for manual valve addressing) 1) Normal setting (Non-Zoning settin

12 HR UnitInstallation2) Zoning setting- Set the address of the valve of the HR unit to the central control address of the connected indoor unit.- SW0

Installation Manual 13ENGLISHCoil Exchanging MethodBe sure that system power off before exchanging the coil. Check the position of the solenoid coil

14 HR Unit

[Representative] LG Electronics Inc. EU Representative Krijgsman 1, 1186 DM Amstelveen, The Netherlands[Manufacturer] LG Electronics Inc. Changwon 2nd

2 HR UnitPRHR Series Heat Recovery Unit ManualTABLE OF CONTENTSSafety Precautions ...

Installation Manual 3ENGLISHSafety PrecautionsSafety PrecautionsTo prevent injury to the user or other people and property damage, the following inst

4 HR UnitFeatures & Installation PartInstallation Part• Installation Manual • Hanging bolts (4 x M10 or M8, Nut(8 x M10 or M8), Flat washers(8 x M

Installation Manual 5ENGLISHInstallationInstallationn Select installation location of the HR unit suitable for following conditions • Avoid a place w

6 HR UnitInstallation• Select and mark the position for fixing bolts.• Drill the hole for set anchor on the face of ceiling.• Insert the set anchor an

Installation Manual 7ENGLISHInstallationCAUTION: HR Unit should be installed that top side is facing up. If not, it may cause failure of the product.

8 HR UnitInstallationInsulate the connected pipes completely(all thermal insulation must comply with local requirement)Thermal InsulationWiring Connec

Installation Manual 9ENGLISHInstallationSetup the switch of HR Unit1. Main function of SW02MON S/W SelectionNo.1Method for addressing valves of an HR