LG LV880 Manuel d'utilisateur télécharger pdf (Page 16)

Controlling your TV with supplied remote control and technical

specifications

Specifications are correct at time of printing. LG is constantly innovating and products may change

at any time without warning.

Specifications

General

Power 200-240V~, 50Hz

Power consumption Approx. 12 Watts (Energy Saving mode: 3 Watts)

Video Head System Double azimuth 4 heads, helical scanning

Tape speed 23.39 mm/sec (SP mode) 11.69 mm/sec (LP mode)

Tape Format Tape width 12.7mm (0.5 inch)

Max. recording time 4 hours (SP mode, E-240 Tape) 8 hours (LP mode, E-240 Tape)

Rewind time Approx. 65 (±10) secs (E-180 tape)

Approx. 180 (±30) secs (E-180 tape)

Dimensions 360 x 82 x 272mm (W x H x D)

Weight 2.87 kg

Operating temperature 5º C - 35º C

Operating humidity Less than 80%

Timer 24 hours display type

Video

Television system CCIR standard (625 lines, 50 fields)

PAL I colour signal

Recording format PAL I

RF reception PAL I

RF OUT PAL I

Input level VIDEO IN (SCART, RCA) 1.0 Vp-p, 75 Ohm unbalanced

Output level VIDEO OUT (SCART) 1.0 Vp-p, 75 Ohm unbalanced

Signal to noise ratio More than 43 dBm

RF modulator UHF channels 22-68 (adjustable)

Audio

Input level AUDIO IN (SCART, RCA)

SCART: - 6.0 dBm, more than 10 kohms

RCA: - 6.0 dBm, more than 47 kohms

Output level AUDIO OUT (SCART, RCA)

SCART: - 6.0 dBm, less than 1 kohms

RCA: - 6.0 dBm, less than 1 kohms

Track Mono track & Hi - Fi Track

Frequency response Normal : 100 Hz - 10 kHz (-6/+3 dBm)

Hi-Fi : 20 Hz - 20 kHz (-3/+3 dBm)

Signal to noise ratio Hi-Fi : More than 70 dB (JIS A filter)

Dynamic range Hi-Fi : More than 85 dB (JIS A filter)

You can control the sound level, input

source, and power switch of your LG

TV with the supplied remote control.

By pressing You can

TV POWER Turn the TV on or off.

TV PR +/– Scans up or down through

memorized channels.

TV VOL +/– Adjust the volume of

the TV.

TV AV Switch the TV’s input

source between the TV

and other input sources.

Controlling other TVs

with the remote control

You can control the sound level, input

source, and power switch of non-LG

TVs as well. If your TV is listed in the

table below, set the appropriate man-

ufacturer code.

1 While holding down TV POWER

button, press the number but-

tons to select the manufacturer

code for your TV (see the table

on the right).

2 Release TV POWER button.

Code numbers of

controllable TVs

If more than one code number is list-

ed, try entering them one at a time

until you find the one that works with

your TV.

Manufacturer Code Number

LG / GoldStar 1 (Default), 2

Zenith 1, 3, 4

Samsung 6, 7

Sony 8, 9

Hitachi 4

Notes

• Depending on your TV, some or all

buttons may not function on the

TV, even after entering the correct

manufacturer code.

• If you enter a new code number,

the code number previously

entered will be erased.

• When you replace the batteries of

the remote, the code number you

have set may be reset to the

default setting. Set the appropriate

code number again.

GC985/967NP1 NA4ULL-ENG 3/17/04 9:00 AM Page 16

1 2 ... 11 12 13 14 15 16 17

Commentaires sur ces manuels

Pas de commentaire

LG LV880 Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de cassettes LG LV880