LG V192H Manuel d'utilisateur télécharger pdf (Page 9)

Preparation

Connections

Caution:



Make sure this unit is connected directly to the TV. Set

the TV to the correct video input channel.



Do not connect this unit’s AUDIO OUT jack to the

phone in jack (record deck) of your audio system.

Connecting to a TV & Decoder

(or Satellite)

Make one of the following connections, depending on

the capabilities of your existing equipment.

Basic connection (AV)

1. Connect the EURO AV1 AUDIO/VIDEO on the rear

panel of this unit to the SCART input socket on the

TV using a SCART lead (T1).

2. Some TV broadcasters transmit encoded television

signals which you can only see with a purchased or

rented decoder. You can connect such a decoder

(descrambler) to this unit (T2).

1. Connect the VIDEO (DVD/VCR OUT) jacks on the

DVD Player to the corresponding in jacks on the TV

using the video cable (V).

2. Connect the Left and Right or AUDIO (DVD/VCR

OUT) jacks of the DVD+VCR to the audio left/right in

jacks on the TV using the audio cables (A1).

Notes:



If you use this connection, set the TV’s source

selector to VIDEO.



For DVD/VCR VIDEO OUT jack connection, resolu-

tion must be set to 576i or 576p, however DVD/VCR

VIDEO OUT is always at 576i standard resolution.



The encoded television signals (CANAL+ or

PREMIERE) are not decoded in the 1W Mode

(see p. 26).

Basic connection (RF)

1. Connect the RF antenna cable from your indoor/

outdoor antenna to AERIAL jack on the rear panel of

this unit.

2. Connect the supplied RF antenna cable from the

RF.OUT jack on the rear panel of this unit to your

television’s Antenna Input (R).

S-Video connection

1. Connect the S-VIDEO OUT jack on this unit to the

S-Video input jack on the TV using the S-Video

cable (S).

2. Connect the Left and Right AUDIO OUT or DVD/VCR

AUDIO OUT jacks of the DVD Player to the audio

left/right in jacks on the TV using the audio cables

(A1).

Note:

For S-Video connection, resolution must be set to 576i

or 576p, however S-VIDEO OUT is always at 576i

standard resolution.

DVD exclusive out connection

Component Video /

Progressive Scan connection



If your television is a high-definition or “digital ready”

television, you may take advantage of the DVD

Player’s progressive scan output for the highest video

resolution possible.



If your TV does not accept the Progressive Scan

format, the picture will appear scrambled if you try

Progressive Scan on the DVD Player.

1. Connect the COMPONENT / PROGRESSIVE SCAN

VIDEO OUT jacks on the DVD Player to the

corresponding in jacks on the TV using the Y Pb Pr

cable (C).

2. Connect the Left and Right AUDIO OUT jacks of this

unit to the audio left/right in jacks on the TV using

the audio cables (A2).

Notes:



The 576p and 720p resolutions are Progressive scan

applied resolutions.



Progressive scan does not work with the analog video

connections (yellow VIDEO OUT jack) or S-VIDEO.

AUDIO INPUT

AERIAL

Rear of TV

Rear of this unit (Basic connection)

COMPONENT VIDEO INPUT/

PROGRESSIVE SCAN

Pb Y

VIDEO

INPUT

Decoder (or Satellite)

SCART INPUT

VA1

S-

VIDEO INPUT

AUDIO INPUT

AERIAL

Rear of TV

Rear of this unit (DVD exclusive out connection)

COMPONENT VIDEO INPUT/

PROGRESSIVE SCAN

Pb Y

VIDEO

INPUT

SCART INPUT

C A2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 37 38

Commentaires sur ces manuels

Pas de commentaire

LG V192H Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD LG V192H