Lg Network Attached Storage with built-in Blu-ray Rew Manuel d'utilisateur télécharger pdf (Page 145)

. RAID trouble shooting

1

② Error is due to the existing HDD.

a If the RAID configuration is RAID1, choose between each of the following.

∙ Back up the volume data on another storage device. Next, reconfigure

the volume.

∙

Format the newly connected HDD. Data in the volume where the

problem has occurred should be backed up by the administrator.

Separate the HDD in which the error has occurred. Execute RAID1

reconfiguration after exchanging HDD on the LG NAS.

b When RAID configuration is RAID5, the volume state is changed to

‘destroyed’. The data must be backed up and the system must be

reconfigured. Some data may be lost during this process.

When connecting or disconnecting the HDD, strictly adhere to the following

procedure and avoids abnormal system operation or data obstruction.

In the LG NAS, one HDD can be connected or disconnected at a time.

2. 10 seconds will lapse before 2 tones are heard when the LG NAS is connected to

or disconnected from a new hard drive. Next, connect or disconnect the HDD.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 156 157

Pas de commentaire

Lg Network Attached Storage with built-in Blu-ray Rew Manuel d'utilisateur Page 145