LG 43LX310C Manuel d'utilisateur Page 19

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 37
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 18
12
ENGLISH
•  Screw length from outer surface of back cover should be under 8
mm. (Only 28LX53**)
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Wall mount Pad
Back Cover
Max.8 mm
NOTE
•  Use the screws that are listed on the VESA standard screw
specications.
•  The wall mount kit includes an installation manual and necessary
parts.
•  The wall mount bracket is not provided. You can obtain additional
accessories from your local dealer.
•  The length of screws may dier depending on the wall mount.
Make sure to use the proper length.
•  For more information, refer to the manual supplied with the wall
mount.
•  When installing the wall mounting bracket, use the adhesive
label provided. The adhesive label will protect the opening from
accumulating dust and dirt. (Only when the label is provided)
Provided Item
Adhesive label
•  When attaching a wall mounting bracket to the TV, insert the wall
mount spacers into the TV wall mount holes to adjust the vertical
angle of the TV. (Only when the item of the following form is
provided)
Provided Item
Wall Mount Spacer
Connections (notications)
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
NOTE
•  This model supports 4K (ULTRA HD) videos only in HDMI input.
(Only UX34**)
•  ULTRA HD videos are not supported in the tuner or USB input.
(Only UX34**)
•  The external device connection may dier from the model.
•  Connect external devices to the TV regardless of the order of the TV port.
•  If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder or
VCR. For more information of recording, refer to the manual provided
with the connected device.
•  Refer to the external equipment’s manual for operating instructions.
•  If you connect a gaming device to the TV, use the cable supplied with
the gaming device.
•  In PC mode, there may be noise associated with the resolution, vertical
pattern, contrast or brightness. If noise is present, change the PC output
to another resolution, change the refresh rate to another rate or adjust
the brightness and contrast on the PICTURE menu until the picture is
clear.
•  In PC mode, some resolution settings may not work properly depending
on the graphics card.
•  If ULTRA HD content is played on your PC, video or audio may become
disrupted intermittently depending on your PC’s performance. (Only
UX34**)
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
•  Use a signal splitter to use more than 2 TVs.
•  If the image quality is poor, install a signal amplier properly to improve
the image quality.
•  If the image quality is poor with an antenna connected, try to realign
the antenna in the correct direction.
•  An antenna cable and converter are not supplied.
•  Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC
Vue de la page 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 36 37

Commentaires sur ces manuels

Pas de commentaire