24
ow to use washer
H
Add Load
Use this function to add loads or remove the
foreign material.
• How to use “Add Load”
- Press the “Add Load” button.
- Close the door after add loads or remove
the foreign material(e.g. coin or pin etc.)
- Press the “Start/Pause” button.
• Open the door when “Door Lock” is off after
checking the safety.
• Results when choosing “Add Load” during
cycles
- When the tub is spinning: Tub stops and
“Door Lock” is off.
- When water temperature in the tub is
higher than 45°C: “Add Load” is not
available with short warning sound for
safety.
- When lots of water is in the tub: “Door
Lock” is off after draining by safe water
level.
• “Add Load” doesn’t work when “Tub
Cleaning” course is in progress for safety
Time Delay
Preparing washing before starting “Time Delay”
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in
the drawer.
• How to set “Time Delay”
- Press Power( ) button.
- Turn the Program dial to select
the program you require.
- Press Time Delay button and set the
desired time.
- Press the Start/Pause( ) button.
• If Time Delay button is pressed, “3:00” is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
• Each pressing of the button advances time
delay by one hour.
• To cancel the time delay, press the
Power( ) button.
• Time Delay is ‘expected time’ from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
Commentaires sur ces manuels