LG LV880 Manuel d'utilisateur télécharger pdf (Page 6)

Tuning and adjusting TV stations manually

You may prefer to tune your television manually. Manual tuning can be more effective if the television signal in your area is too

weak for the ACMS to work properly. You can also fine tune your channels and customise the channel names.

Manual tuning

1 Turn on your television and your

Video Recorder. Select the video

channel on your television and

press to access the main

menu.

2 Press either 1 or 2 to select PR

SET then press OK.

3 Press again and the television

channel table will then appear.

4 Use the 3 or 4 buttons to select

the program number you want to

tune then press OK.

5 Select the CH section (if not

already selected) by using the 1

or 2 buttons and then use the 3

or 4 buttons to move through the

channel numbers to find the

required station.

6 The station can be fine tuned to

improve picture quality. Select

MFT (Manual Fine Tuning) using

the 1 or 2 buttons. Use the 3

or 4 buttons to adjust the picture.

7 Select STATION by pressing 2 you

can then name your station.

If the station transmits PDC the

station name will be added

automatically.

8 Press OK to reveal the television

station name list. Use the 3 or 4

buttons to select a station name

from the list. Press OK to select it.

If the name you require is not on

the list see Customising channel

names opposite (Start from step

No. 5).

9 To confirm the station placement

press .

10 Press again to remove the

menu.

11 The new station has now been

red into your Video Recorder.

If you wish to manually tune other

channels you should repeat the

above procedure.

To move the manually tuned channel

to it’s correct position see Changing

the order of the television stations

on page 5.

If it is necessary for you to tune all

the television stations manually you

may find it easier if you write the CH

numbers down for each station as

you find them. You can then select

each channel from the main menu

and type the CH numbers in directly.

Each channel will then be in the

correct position so there is no need

to change them later.

Customising channel

names

If the station name you require isn’t

listed you can insert one manually

instead of using the templates.

1 Press to access the main

menu. Use 1 or 2 to select PR

SET then press OK.

2 Press again then use 3 or 4 to

select the programme number you

wish to customise station name.

3 Press OK.

4 Press 2 to go to STATION and

then press OK.

5 Then press 2, a flashing bar

appears beneath the first letter.

6 Use 3 or 4 to select letters and

numbers for the new station name

up to a maximum of 5.

7 Press 1 or 2 to move between

the characters.

8 Press OK.

9 To confirm the new position

press .

10 Press again to exit the menu.

11 The new station name is now

stored in your Video Recorder.

02 C33 00 BBC2

03 C23 00 ITV

04 C30 00 CH4

05 C37 00 CH5

06 - - - - - - - - -

07 - - - - - - - - -

08 - - - - - - - - -

01 C26 00 BBC1

,DELETE :

MOVE :

SET

PR CH MFT

06 00

C40

BORDE

ANGLI

ITV

BBC2

BBC1

CH TV

WEST

GRANA

SET

GC985/967NP1 NA4ULL-ENG 3/17/04 9:00 AM Page 6

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Commentaires sur ces manuels

Pas de commentaire

LG LV880 Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de cassettes LG LV880