LG VR6170LVM Manuel d'utilisateur télécharger pdf (Page 14)

OVERVIEW

Install the home station. (Page 13)

Insert the power cord plug into an outlet and locate the

station against a wall. If power is not supplied to the

home station, the Roboking 2.0 will not charge.

Turn on the power supply of the Roboking 2.0.

(Page 14)

Turn on the power switch located on the bottom of the

Roboking 2.0 and press the upper START/STOP button

to turn on the power supply.

※

If the power supply is not turned on, refer to page 14.

Check the dust bin.

Check the cleanness of the dust bin before starting

the cleaning and close the cover of the dust bin on the

main unit.

Start cleaning. (Page 15)

Press the START/STOP button once again while

the Roboking 2.0 is turned on. You will hear the

announcement of cleaning and cleaning will begin.

Automatic charge. (Page 16-17)

Use the cleaning mode and auxiliary functions.

(Page 18-22)

The Roboking 2.0 will self-diagnose and automatically

return to the home station to recharge before the

complete discharge of the battery. It takes approximately

three hours to charge the battery.

With the Roboking 2.0 and remote controller button, the

cleaning method and auxiliary functions can be used.

Zigzag or spatial expansion (cell by cell) cleaning method

can be selected for the cleaning mode and manual

cleaning, spot cleaning, timer cleaning and micro fiber

mop cleaning can be selected as an auxiliary function.

< Warning > When Roboking 2.0 is operated with the cover of the dust bin open,

it can cause an injury or serious damage to the product.

Flickering

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Pas de commentaire

LG VR6170LVM Manuel d'utilisateur Page 14