LG VR6170LVM Manuel d'utilisateur télécharger pdf (Page 29)

CLEANING THE SIDE BRUSH

Foreign objects/materials such as hair can easily adhere to the side

brush. Remove such materials at least once a week.

If excessive amounts of foreign materials are stuck to the brush,

there is the risk of damage to the brushes.

If the ﬂoor is rough or skirting boards are frequently cleaned, the side brush may bend or become

damaged. In this case, use the following method to straighten the side brush.

1. The following procedure is helpful in restoring

deformed brushes.

2. Turn off the power supply by pressing the

START/STOP button on the Roboking 2.0 for two

seconds.

3. Place the Roboking 2.0 at the end of a table to

make cleaning the side brush easier. Make sure

that the Roboking 2.0 is not in danger of falling.

4. Soak the side brush in warm water.

5. Press down on the side brush for about ten

seconds so that it is completely submerged in

the water.

6. Slowly wipe the side brush by sliding it through

your hand.

7. Rotate the side brush and repeat steps 4-6 for

each section of the brush.

8. Use the side brush only after it has completely

dried.

1. Remove the screw and separate the side brush.

2. Exchange and re-assemble new side brushes.

How to change the side brush

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Pas de commentaire

LG VR6170LVM Manuel d'utilisateur Page 29