LG VR65710LVMP Manuel d'utilisateur télécharger pdf (Page 33)

CLEANING THE DUST BIN FILTER

The Dust Bin Filter consists of a EPA Filter and Sponge Filter.

Clean both the EPA and Sponge ﬁlters as per the following sequence.

3. Use a cleaning brush to clean the Sponge Filter.

If using water to clean it, allow it to dry completely

in the shade before reﬁtting.

4. Assemble the EPA and Sponge ﬁlters back

onto the Filter housing as per the following

sequence.

※

Fit the rectangular locator on the EPA Filter

into the locating slot of the ﬁlter body.

※

Be careful not to incorrectly assemble EPA

and Sponge Filter onto the Filter housing.

2. Thoroughly clean out the ﬁne dust particles on

the EPA Filter, with a vacuum cleaner or cleaning

brush.

※



Its suction power will be reduced.



week, with a brush or vacuum cleaner.



to the dust bin. Operating the Robot cleaner without the EPA and sponge filters will cause

the suction motor to malfunction.

Tip

1. Pull the hook on the left of the EPA Filter

module on the rear side of Dust Bin to

separate the EPA Filter and the sponge.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Pas de commentaire

LG VR65710LVMP Manuel d'utilisateur Page 33