LG VR65710LVMP Manuel d'utilisateur Page 41

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 48
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 40
39
BEFORE YOU CALL FOR SERVICE
Confirm before reporting the failure of Robot Cleaner.
Problem Solutions (Reference page)
The power supply cannot be
turned on.
Check that the power switch is turned on. (Page 16)
The power supply
automatically turns off.
This is not a failure. Robot Cleaner has its own power saving
function.
If it is not used for ten minutes after the power supply is turned on,
the power will automatically turn off. (Page 18)
The Robot Cleaner will not
charge.
Check whether the main power switch is turned on.
Remove objects around the home station. (Page 16)
Confirm that the power supply is connected to the home station.
(Page 15)
Wipe the charging terminals with a dry cloth.
Suction power becomes
weak.
Check whether there is foreign material blocking the suction port.
(Page 32)

Clean the dust bin filter. (Page 31)
 Confirm that the dust bin has been mounted properly.
Confirm that the dust bin filter has been mounted properly.
(Page 31)
Check whether foreign material is caught in the brush. (Page 32)
The Robot Cleaner will not
activate.
Confirm that the power switch is turned on. (Page 16)
Confirm that the battery has been charged. (Page 19)
The lower brush does not
rotate.
Clean the brush. (Page 32)
Confirm that the brush has been mounted properly. (Page 32)
Movements or travel path are
abnormal.
Carefully wipe the sensors with a dry soft cloth. (Page 33)
If the ultra microfiber mop is attached, confirm that it is mounted
properly. (Page 26)
Turn the main power switch off and on.
The Robot Cleaner cannot
be activated with the remote
control.
Replace the remote control batteries. (Page 13)
Confirm that the control is within the coverage area of the main
unit, which is less than 3
m
. (Page 13)
Check whether the main power switch is turned on. (Page 16)
Vue de la page 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Commentaires sur ces manuels

Pas de commentaire