LG F2514NTGW Manuel d'utilisateur télécharger pdf (Page 13)

Leveling the Washing Machine

If the oor is uneven, turn the adjustable feet as required

(Do not insert pieces of wood etc. under the feet). Make

sure that all four feet are stable and resting on the oor

and then check that the appliance is perfectly level (Use

a spirit level).

•

Once the washing machine is level, tighten the lock

nuts up towards the base of the washing machine. All

lock nuts must be tightened.

Raise

Lock Nut

Lower

Tighten all 4

locknuts securely

•

Diagonal Check

When pushing down the edges of the washing

machine top plate diagonally, the washing machine

should not move up and down at all (Check both

directions). If the washing machine rocks when

pushing the machine top plate diagonally, adjust the

feet again.

NOTE

•

Timber or suspended type ooring may contribute

to excessive vibration and unbalance.

•

If the washing machine is installed on a raised

platform, it must be securely fastened in order to

eliminate the risk of falling off.

Connecting Inlet Hose

•

Water supply pressure must be between 0.1 MPa and

1.0 MPa (1.0 ‒ 10.0 kgf/cm

•

Do not strip or crossthread when connecting inlet hose

to the valve.

•

If the water supply pressure is more than 1.0 MPa, a

decompression device should be installed.

•

Periodically check the condition of the hose and

replace the hose if necessary.

Checking Rubber Seal Inlet Hose

Two rubber seals are supplied with the water inlet hoses.

They are used for preventing water leaks. Make sure the

connection to taps is sufciently tight.

Hose connector

Rubber seal

Hose connector

Rubber seal

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

LG F2514NTGW Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver LG F2514NTGW