LG WFS1739EKD Manuel d'utilisateur télécharger pdf (Page 28)

Placing and Leveling

Please ensure that transit restraint has been removed before operating your machine.

If the washer is installed on a uneven,weak or tilted floor causing excessive vibration,

spin failure or “ ” error can happen to it.

It must be placed on a firm and level floor to prevent spin failure.

Top view of the machine

more than 10 cm

than

2 cm

more than

2 cm

Place the machine on a flat and firm surface which allows proper clearance.

We suggest a minimum clearance of 2 cm to the

right side and left sides of the machine for ease of

installation.

At the rear, a minimum clearance of 10 cm is

suggested.

Check that the machine is level

Open the lid and look from above to see if it is

same as shown.

Leveling the machine

Lift the front of the washing machine and twist

the Adjustable Leg until the surface bubble is

placed in the center.

NOTE

SETTING SCREW

ANTI-RAT COVER

BACK

Adjustable legs

Caution

Installing the Anti-Rat Cover (option) Insert the anti-rat cover to be firmly fixed from the back or

front of washing machine and screw it

If the power is supplied from a cord extension set or generator, the cord extension set or electrical

portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 79 80

Pas de commentaire

LG WFS1739EKD Manuel d'utilisateur Page 28