Lg Electric Range LSE3092ST Manuel d'utilisateur Page 20

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 50
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 19
20
How to set convection auto conversion
function
When using convection bake and roast, the
Convection Auto Conversion feature will automatically
convert entered regular baking temperatures to
convection baking temperatures.
This feature is activated so that the display will show
the actual converted (reduced) temperature. For
example, if you enter a regular recipe temperature of
350°F and press the START function, the display will
show the converted temperature of 325°F.
󲻸 Touch and hold the
WARM/PROOF pad for 3
seconds. “AUTO” will appear in
the display.
󲻹 Touch the # 1 pad to ENABLE or
touch the # 2 pad to DISABLE.
󲻺 Touch the START pad to accept
the change.
How to adjust the oven thermostat
You may find that your new oven cooks differently
than the one it replaced. Use your new oven for a few
weeks to become more familiar with it. If you still think
your new oven is too hot or too cold, you can adjust
the thermostat yourself.
Do not use thermometers,such as those found in
grocery stores, to check the temperature setting of
your oven. These thermometers may vary 20–40
degrees.
NOTE:
This adjustment will not affect the broiling or the Self
Clean temperatures. The adjustment will be retained
in memory after a power failure.
The oven temperature can be increased (+) or
decreased (-) as much as 35°F or 19°C.
NOTE:
Once the temperature is increased or decreased, the
display will show the adjusted temperature until it is
readjusted.
NOTE:
The thermostat adjustment for Bake will also affect
Convection Bake or Convection Roast.
To Adjust the Oven Temperature
󲻸
Touch and hold the WARM/PROOF
pad for 3 seconds. “AUTO” will
appear in the display.
󲻹 Touch the WARM/PROOF pad 1
time and “Adj" will be displayed.
󲻺
Using the number pad enter the
temperature correction you wish to
adjust.
For example, to adjust the oven
temperature 15 degrees, touch 1 and 5.
󲻻 Touch WARM/PROOF once to
increase (+) or twice to decrease
(-) the temperature.
󲻼 Touch the START pad to accept
the change.
OPERATING INSTRUCTIONS
SPECIAL FEATURES OF YOUR OVEN CONTROL
Your new touch pad control has additional features that you may choose to use. The following pages
describe these features and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day.
They remain in the control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after a
power failure.
or
Vue de la page 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Commentaires sur ces manuels

Pas de commentaire