LG LNB5110 Manuel d'utilisateur télécharger pdf (Page 16)

16 Operation and settings

• Set the type of [Sensor] according to External Sensor

type. The Day/Night mode is converted as below table.

Sensor Type Alarm Mode

Normal Open

High Day

Low Night

Normal Close

High Night

Low Day

• If the difference of value between the [Day >> Night]

and [Night >> Day] is not big enough, may occur the

problem to convert the Day and Night.

• When the [AGC] set to [Off], the [Day/Night] is initialized

to the [Day] mode. Other settings of [AGC] are initialized

to the [Auto] mode.

• Default: Click this button to restore the IP device back to original

factory settings.

SmartIR (LNV7210R / LND7210R / LNU7210R series only)

SmartIR (LNV5110R / LND5110R / LNU5110R series only)

> Mode

- Auto: When the [Day/Night] menu set to [Night]

mode, the brightness of the IR LED will be adjusted

automatically. The [Max Level] is displayed.

- Manual: When the [Day/Night] menu set to [Night]

mode, the brightness of the IR LED will be fixed.

- Off: When the [Day/Night] menu set to [Night] mode, IR

LED will be turned off.

> Max Level: If the [Mode] option set to [Auto], can be adjust

the maximum brightness of IR LED.

Note:

When set the [IRIS] to the [Manual], the [Auto] mode is

deactivated.

> Level: If the [Mode] option set to [Manual], can be adjust the

fixed brightness of IR LED.

• Default: Click this button to restore the IP device back to original

factory settings.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Pas de commentaire

LG LNB5110 Manuel d'utilisateur Page 16