LG LNB5110 Manuel d'utilisateur télécharger pdf (Page 21)

Operation and settings 21

TCP/IP

IPv4 address status

> Automatically set with DHCP: Select this option when a

DHCP server is installed on the network to allow IP address

assignment. With this setting, the IP address is assigned

automatically.

- Notify to SMTP server, if IP address is changed: If you

select this option, the user get a notification mail telling

about changing of IP of the IP device.

Note:

• You should register the SMTP server on the Event server

setting to set this function.

• If you select [Automatically set with DHCP], the camera

obtain IP address from DHCP server after IP address is

set “192.168.0.16”.

> Statically set: Select this option when you set a fixed IP

address, with this setting, specify the IP address, Subnet

mask and default gateway manually.

- IPv4 address: Enter an IP address.

- Subnet mask: Enter a subnet mask address.

- Gateway: Enter the gateway address.

DNS server status

> Primary DNS server: Enter the Primary domain name server

that translates the hostnames into IP address.

> Secondary DNS server: Enter the Secondary DNS server

address that backups the Primary DNS.

IPv6 address status

> Enable: Click the check box if you want to use the IPv6

address.

> Mode

- Manual: Select this option when you set a fixed IP

address manually.

- Basic: Select this option to allow IPv6 address

assignment based on the Mac address. With this setting,

the IP address is assigned automatically.

- DHCPv6: Select this option when exist a DHCPv6 server

in network. If DHCPv6 server is not existed or temporary

disability, it requests assignment every 3 minutes.

> IPv6 address: You can enter the IP address when you select

the Manual mode. It alarms when you enter the invalid IP

address.

• Save: Click this button to confirm the settings.

DDNS

This free service is very useful when combined with the LG DDNS

Server. It allows the user to connect the IP device using the URL,

rather than an IP Address. This also solves the problem of having a

dynamic IP address.

DDNS status

> Don’t use DDNS server: Disable the DDNS function.

> Use DDNS server: Enable the DDNS function.

- Provider: Displays the DDNS provider.

- Hostname: Enter the hostname you want to use.

• Save: Click this button to confirm the settings.

IP filtering

The access of the IP addresses in the list are allowed or denied

according to the choice made in the drop-down list of the Basic

policy option. The administrator can add up to 10 IP address entries

to the list (a single entry can contain multiple IP addresses). The

users from these IP addresses need to be specified in the user list

with the appropriate access rights. The IP list is to control the access

permission of clients by checking the client IP address.

IP list

> Basic policy: Select the basic policy type.

- Allow all: Allow all the IP address basically, but the IP

addresses in the list are denied.

- Deny all: Deny all the IP address basically, but the IP

addresses in the list are allowed. It needs at least one IP

address to activate this function.

• Save: Click this button to confirm the settings.

• Add: Click this button to add the IP address.

1. Click the [Add] button.

2. Set the IP options.

- Alias: Enter the alias.

- From: Enter the start IP address for the IP filtering.

- To: Enter the end IP address for the IP filtering.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Commentaires sur ces manuels

Pas de commentaire

LG LNB5110 Manuel d'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité LG LNB5110

Related products and manuals for Pumps Sun-pumps MTR BLM-SB-103S-120Y