LG ST600 Manuel d'utilisateur télécharger pdf (Page 17)

Connecting 17

Connecting

Wired Network Setup

If there is a DHCP server on the local area

network (LAN) via wired connection, this unit will

automatically be allocated an IP address. After

making the physical connection, a small number

of home networks may require the unit’s network

setting to be adjusted. Adjust the [NETWORK]

setting as follow.

Preparation

Before setting the wired network, you need to

connect the broadband internet to your home

network.

1. Select [Connection Setting] option in the

[Setup] menu then press Centre button.

2. The [Connection Setting] menu appear on the

screen. Use

W/S

to select the [Wired] and

press Centre button.

3. Use

W/S/A/D

to select the IP mode

between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP

address automatically.

If there is no DHCP server on the network and

you want to set the IP address manually, select

[Static] then set [IP Address], [Subnet Mask],

[Gateway] and [DNS Server] using

W/S/A/

Note

4. Select [OK] and press Centre button to apply

network settings.

5. The unit will ask you to test the network

connection. Select [OK] and press Centre

button to complete the network connection.

6. If you select [Test] and press Centre button at

step 5 above, the network connection status is

displayed on the screen.

You can also test it on the [Connection Status]

in the [Setup] menu.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

LG ST600 Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Non LG ST600